Complete Your Gear...

• Standard fit
• Waterproof, breathable, seam-sealed DryVent™ 2L shell with a non-PFC DWR finish helps keep you dry
• Body fabric made with 94% recycled polyester; lining made with 100% recycled polyester
• Heatseeker™ Eco Advanced synthetic insulation has a dual-fiber construction that provides a high warmth-to-weight ratio, packability and durability
• Embossed-logo lining
• Removable, fully adjustable, helmet-compatible hood
• Polyurethane-coated, reverse-coil, #5 center front zip
• Two chest pockets with exposed, PU-coated, reverse-coil, #5 zips
• Covered, secure-zip hand pockets
• Covered, secure-zip wrist pocket with a goggle wipe
• Internal secure-zip chest pocket
• Large, internal mesh drop-in pocket
• Adjustable cuffs with embossed hook-and-loop tabs
• Underarm venting for temperature regulation
• Integrated, stretch-knit wrist gaiters with thumbholes
• Snap-down powder skirt with gripper elastic and a jacket-to-pant integration clip
• Internal hem cinch-cord with a two-point adjustment
• Cinch-cord ends exit into hand pockets
• Center Back: 30.75"
• Avg Weight: 2 lbs 7.01 oz (1106 g)
• body: 75D 175 g/m² DryVent™ 2L—94% recycled polyester, 6% elastane twill with non-PFC durable water-repellent (non-PFC DWR) finish
• body lining: 50D 72 g/m² 100% recycled polyester plain weave with non-PFC DWR finish
• collar lining: 105 g/m² 100% recycled polyester brushed tricot
• insulation: 80 g Heatseeker™ Eco Advanced 80% post-consumer recycled polyester in body; 60 g in hood, collar and sleeves
• Style No: NF0A87Y6

• Standard fit
• Waterproof, breathable, seam-sealed DryVent™ 2L shell with a non-PFC DWR finish helps keep you dry
• Body fabric made with 94% recycled polyester; body lining made with 100% recycled polyester
• Heatseeker™ Eco Advanced synthetic insulation has a dual-fiber construction that provides a high warmth-to-weight ratio, packability and durability
• Increased insulation in the seat for added warmth while you're sitting on a chairlift or snow
• Zip-fly with a reinforced hook-and-loop snap closure
• Waistband with belt loops and adjustable hook-and-loop tabs
• Covered, secure-zip welt hand pockets
• Thigh pockets with polyurethane-coated, #5 YKK® zips
• Articulated knees for increased mobility
• High-denier kickpatches and hem binding for added durability
• Jacket-to-pant integration point at back of waist
• Chimney Venting™ system with mesh-lined inner-thigh vents and mesh gaiter panels for temperature regulation
• StretchVent™ gaiters with gripper elastic
• Inseam: S 30", R 32", L 34"
• Avg Weight: 1 lb 7.6 oz (669 g)
• body: 75D 175 g/m² DryVent™ 2L—94% recycled polyester, 6% elastane twill with non-PFC durable water-repellent (non-PFC DWR) finish
• body lining: 50D 78 g/m² 100% recycled polyester plain weave with non-PFC DWR finish
• seat and knee lining: 20D x 30D 70 g/m² 91% polyester, 9% elastane twill with non-PFC DWR finish
• waist lining: 105 g/m² 100% recycled polyester brushed tricot
• kickpatches and hem binding: 420D x 500D 262 g/m² 100% recycled nylon with non-PFC DWR finish
• insulation: 40 g Heatseeker™ Eco Advanced 80% post-consumer recycled polyester in legs; 60 g in seat
• Style No: NF0A87Y7

• 230g 4-way stretch AIR-TECH fabric
• YKK zippers throughout
• Easy entry / exit through full length center front zipper
• Zip from bottom up for easy-peezy bathroom breaks
• 350° hip zip - for smooth number 2s
• 7 panel form-fitting hood with chin protector
• Thumb loops at cuffs
• Waistband draw cord
• Ninja Star 2-color embroidery at chest

It’s hard to beat THE ORIGINAL. This is the one-piece hooded base layer that started it all, developed to virtual perfection over the course of nearly 20 years of testing and abuse by our Ninja Ambassadors and Professional Team. If you need base layer, this is simply the best. Experience all of the action and fringe benefits of being a Ninja, while enjoying the undeniable function (and fashion) of the original Ninja Suit.

• Men's Baselayer Pant
• Made in the USA
• Full leg regular fit
• Critical Dual-Layer insulation on thighs & buttocks
• Vented crotch with fly
• Soft-flex waistband
• Flatlock stitching
• Patented fabric w/ 4-way stretch
• UPF 50+
• USA Milled Fabric
• Machine washer & dryer friendly

The Men’s Summit Pant Baselayer offers dual-layer insulation on critical points for the widest range of applications. The Summit Pant is made in the USA, has a full-length fit, and an everyday weight designed to work with your outer layers to keep you warm and dry in any condition. Critical construction elements include a vented crotch, fly, and soft-flex waistband. BlackStrap’s patented fabric is antimicrobial, machine washer and dryer friendly is milled in the USA, and has 4-way stretch allowing the ankle cuffs to be easily worn at ¾ length without restriction.

• Standard fit
• Stretchy fabric with a brushed back for added warmth
• Body fabric made with 93% recycled polyester
• Double-layer stand collar
• Center front quarter zip with an internal draft flap and zipper garage
• Set-in sleeves
• Bonded, secure-zip patch chest pocket
• Elastic-bound cuffs and hem
• Heat transfer logo on chest pocket and back-right shoulder
• Center Back: 27"
• body: 265 g/m² 93% recycled polyester, 7% elastane double-knit fleece
• chest pocket and draft flap: 86% recycled polyester, 14% elastane woven with FlashDry-XD™ and non-PFC durable water-repellent (non-PFC DWR) finish
• Style No: NF0A897D

Patagonia Men's R1® Thermal Bottoms

Technical fleece pants for the coldest alpine objectives, the R1® Thermal Bottoms are built to protect you from the elements and keep you warm while on the move. The interior microgrid backing is soft, warm and breathable, and the smooth, durable face fabric sheds wind or snow flurries when the weather rolls in. Made in a Fair Trade Certified™ factory.

• Smooth, durable outer face fabric sheds light snow and wind, and a soft microgrid-fleece backing wicks moisture to keep you warm and comfortable while moving in cold conditions
• Breathable, articulated and ultra-stretchy 91% recycled polyester Technostretch fabric provides unrestricted movement in the mountains
• Smooth waistband with a low-profile, internal drawcord provides an adjustable fit and is comfortable and easy to layer over
• Two zippered handwarmer pockets keep small items close and secure
• Slim-fit leg tapers through to the ankle for foot visibility and easy layering
• Made in a Fair Trade Certified™ factory, which means the people who made this product earned a premium for their labor
• 6.5-oz 91% recycled polyester/9% spandex flat-faced Technostretch fleece. Made in a Fair Trade Certified™ factory
• Part No: 40620

• Deep fit—a roomier, full-coverage fit
• Body fabric and pom made with recycled polyester
• Soft yarn in a structured rib knit
• Cuffed
• Jersey knit logo across crown and logo flag label on back cuff
• 100% recycled polyester
• Style No: NF0A88QW

The Retro Cabin Beanie will take you back while also providing a modern aesthetic.

• Non-PFC DWR finish for added water repellency
• DryVent™ insert helps keep hands dry
• Shell fabric and lining made with recycled polyester
• Heatseeker™ Eco synthetic insulation is made with hollow-core fibers for added warmth, performance and durability
• Lined with super-soft raschel fleece
• Faux-leather palm overlay for added durability
• Gauntlet lining made with wind-resistant WindWall™ fabric
• Progressive Precurve is the accumulative increase of curvature from index finger to pinkie, creating a more natural shape for your fingers as they relax in the glove
• Etip™ functionality works with touchscreen devices
• Nose wipe
• Webbing strap with a buckle on back of hand and shockcord with a cord lock at gauntlet hem for an adjustable fit
• Webbing cuff pull
• Wrist leash helps prevent gloves from dropping and a pairing clip helps keep them together when you’re not wearing them
• 38O aligns with Snowsports The Lift collection
• Matte polyurethane (PU) logo
• shell: 100% recycled polyester with non-PFC durable water-repellent (non-PFC DWR) finish
• palm overlay: 55% polyester, 45% polyurethane (PU) faux leather
• thumb and index finger: Etip™ compatible
• back-of-hand and palm lining: 250 g/m² 100% recycled polyester raschel fleece
• gauntlet lining: WindWall™—100% recycled polyester
• back-of-hand insulation: 250 g Heatseeker™ Eco 70% post-consumer recycled polyester
• palm insulation: 160 g Heatseeker™ Eco 70% post-consumer recycled polyester
• gauntlet insulation: 80 g Heatseeker™ Eco 70% post-consumer recycled polyester
• Style No: NF0A89QG

The Men’s Montana Ski Glove has an elevated insulation package and trims and a warm lining so you'll be ready to hit the slopes.

• Indestructawool™ technology for enhanced durability
• 4 Degree™ elite fit system for a dialed-in, performance-oriented fit
• Shred Shield™ technology reduces wear from toes
• Wider welt for secure fit and comfort
• Body-mapped mesh zones for added breathability
• Content: 63% Merino Wool Content, 10% Nylon Content, 25% Recycled Nylon Content, 2% Elastane Content, 0% Polyester Content, 0% Acrylic Content, 0% Other Content

If your're searching for maximum cushioning in your go-to ski socks, look no further than our Ski Full Cushion OTC Socks. This pair of Merino wool socks helps keep things warm, but breathable. And comfortable, but always performance-ready. Elevate every ski day with your soon-to-be favorite socks.

• Adult fleece neck warmer
• Soft feel for exceptional comfort
  
• 100% polyester fleece (250 gram weight)
  
• One Size Fits All (Adult)
• Machine Washable (Follow tag instructions)

Neck hugging contour keeps you warm from the elements, keeping the cold out and the warmth in!